Synchronous belt wheel in our country is in a rapid expansion of the application of the status of the areas is becoming more and more widely, and it is also in constant development. Below this article from the synchronous belt wheel manufacturing technology and the development of the manufacturing material as an introduction to the development of the synchronous belt wheel in our country. A, synchronous belt wheel manufacturing process of the synchronous belt wheel manufacturing technology development is mainly reflected in two aspects of accuracy and production efficiency improvement. Compared to the seventy s, with the development of the manufacturing precision of the various types of synchronous belt wheel, generally improve the level of left and right sides, technology and even better can improve grade 2 to 3. Such as the low speed synchronous belt wheel precision increased from 8 to 9 magnitude to grade 7 to 8; Machine synchronous belt wheel from 6 to 8 level to level 4 to 6; And mill synchronous belt wheel is from 7 to 8 level up to level 5 to 6. With low modulus and the small specification of synchronous belt wheel, due to the development of high performance gear hobbing machine, with the improvement of the cutting tool material, gear hobbing efficiency have improved significantly. Bull Gear Hob, при условии большой подачи и скорости резки может составлять до 90 метров в секунду. И использование суперхарда, гасившиеся и закаленные стальные синхронные ремни, скорость резки может достигать 200 метров в секунду. Разработка производственного процесса, точность синхронного пояса и реализует качественный скачок в эффективности операции передачи от всех слоев общества, чтобы повысить эффективность нашей страны. Во -вторых, синхронное колесо с изготовлением материала Синхронного ремняного колеса в основном представляет собой сталь, пока синхронное колесо для ремня, в основном содержащая CR, Ni, MO, до стали бора с низким сплавом, а затем от стали бора до карбонитридирующей стали, сталь из бора, а затем от стали бора до карбонитридирующей стали. Чтобы бесплатно резать сталь четыре этапа разработки. Но из -за отсутствия в Китае Ni, элемента CR, так часто используемой карбинизирующей стали или редкоземельной земли с борной сталью в качестве основного материала.